DR-UPS-40

Mean Well DR-UPS 40 20A Power Supply Redundant Module

• Dimension: 55.5*125.2*100 mm (L*W*H)
• Battery controller for DIN rail UPS system
• Parallel connection to DC BUS
• Suitable for 24V system up to 40A
• Installed on DIN Rail TS35 / 7.5 or 15
• Built-in battery test function
• Battery polarity protection
• Relay contact signal output and LED indicator for DC BUS OK, Battery Fail, and Battery Discharge
• Cooling by free air convection
• 3 years warranty
• DC input / DC bus: 24~29V, 40A max.
• Battery input voltage: 21~29V
• Battery input Current: 0~40A
• Charge current (typ.): 2A
• External battery (typ.): 24V, 4AH / 7AH / 12AH
• DC bus ok: Relay status : Short when DC voltage between 21~29V(±3%), relay contacts. LED(Green) : DC bus OK : light; DC bus fail : dark
• Battery fail: Relay status : Short when battery failure is observed through the battery test function, relay contacts LED(Red) : Battery over-discharge warming or battery broken: light; Battery OK: dark
• Battery discharge: Relay status : Short when battery in discharge condition, relay contacts. LED(Yellow) : Battery discharging: light; Battery is not discharging or discharging current <1.5A: dark.
• Working temperature: -20~+70°C
• EMC standards: EN55022 class B, EN61000-4-2,3,4,5,6,8, ENV50204
• Connection: I/P: 0.55Kg; 20pcs / 12Kg / 1.1CUFT
• Meanwell DR-UPS 40 Specifications and Footprint